Anti Torsion Robotic arm control cable

As a power control and signal transmission, PUR outer sheathed anti-distortion cable is suitable for installation in the situation where torsion and bending stress exist at the same time. It has high flexibility, bending resistance, torsion resistance, wear resistance and oil resistance. Resistant to torsion ±180 degrees of 10 million times of continuous core characteristics, also used in welding robot and manipulator connection and assembly, and connection rotary or lifting table

在线咨询

联系方式

所属分类：

Towline cable

关键词：

Anti Torsion Robotic arm control cable

0575-88507258

ailsa.lin@yydzgf.com

Product Detail

PRODUCT INFORMATION

Product Name

Anti Torsion Robotic arm control cable

Product Application

Suitable for installation in torsion and bending stress at the same time, with high flexibility, bending resistance, torsion resistance, wear resistance, oil resistance. Resistant to torsion ±180 degrees, can also be used in welding robot and manipulator connection and assembly, and connection rotary or lifting table

Technical Parameter

Operating temperature range:
Fixed installation: -50℃~+90℃
Mobile installation: -40℃~+90℃

Rated voltage: S<0.5mm2:300/300V;
S>0.5mm2: 300/500V
Pressure test: 1500V/5min (300V/500V) Reference standard: TUV 2 PfG 2577

2000V/5min（450/750V） Reference standard: TUV 2 PfG 2577

Bending test (robot body cable) :

90° bending test above 4mm2: ±90°,R=2.5D,F=5N,40 times/min, requirements > 1 million times Reference standard: TUV 2 PfG 2577 Annex F

Bending test less than 4mm2 (double pulley bending test) : moving speed 0.33m/s, travel =1m, required > 1,000,000 times Reference standard: §6.2 of EN50396

Torsion test (robot body cable) : ±180°,12 times/min, requirements > 500,000 times Reference standard: TUV:2 PfG 2577 Annex H

Bending and rotation test :R=150mm,L=300mm,50 times/min, > 50,000 times Reference standard: 2 PfG 2577/08.16 Annex C

2D linear torsion test :±90° or ±180°, 60 times/min, F=5N, requirement > 5 million times Reference standard: 2 PfG 2577/08.16 Annex G
2D curve torsion test :±90° or ±180°, 60 times/min, F=5N, requirement > 5 million times Reference standard: 2 PfG 2577/08.16 Annex G

3D torsion test :±180°, 30 times/min, requirement > 5 million times Reference standard: 2 PfG 2577/08.16 Annex I

Towing chain test :±180°,12 times/min, requirement > 10 million times Reference standard: 2 PfG 2577/08.16 Annex H

Flame retardant: in line with IEC60332-1-2+EN60332-1-2
Oil resistance: in accordance with DIN VDE0282

Minimum bending radius:
Fixed installation: 4×D (cable diameter);
Mobile installation: 6×D (cable outer diameter) when travel <10 meters, 8×D (cable outer diameter) when travel ≥10 meters
Mobile characteristics: laying stroke: >80m; Acceleration 65m/S2; Moving speed 12m/S Electrical parameters:

Recommended to comply with safety regulations: UL2517,UL2586

ONLINE CONSULTATION

*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible